Carbide Forstner Bits

Freud's Carbide Forstner Bits bring a technical level of excellence not found in a standard high speed steel forstner bit. These bits will drill through a multitude of materials. Use to drill pocket holes, angles holes, overlapping holes and flat bottom holes. Best of all these bits will not burn like standard fostner and will stay sharp many times longer. These bits can be sharpened by any reputable sharpening service who sharpens router bits. Rotation=right.

APPLICATION: Drills all composition materials, plywood, hard wood, solid surface materials, and soft wood. Use in hand held drills and drill presses.

Part No#	Cut Diameter (D)	Overall Length (L)	Shank Dia	Price
FC001	1/4"	3-7/16"	5/32"	CALL
FC002	3/8"	3-7/16"	1/4"	CALL
FC003	1/2"	3-15/32"	5/16"	CALL
FC004	5/8"	3-1/2"	5/16"	CALL
FC005	3/4"	3-1/2"	3/8"	CALL
FC006	7/8"	3-1/2"	3/8"	CALL
FC007	1"	3-1/2"	3/8"	CALL
FC008	1-1/8"	3-1/2"	3/8"	CALL
FC009	1-1/4"	3-1/2"	3/8"	CALL
FC010	1-3/8"	3-1/2""	3/8"	CALL
FC011	1-1/2"	3-1/2"	3/8"	CALL
FC012	1-5/8"	3-1/2"	3/8"	CALL
FC013	1-3/4"	3-1/2"	3/8"	CALL
FC014	1-7/8"	3-1/2"	3/8"	CALL
FC015	2"	3-1/2"	3/8"	CALL
FC016	2-1/8"	3-1/2"	3/8"	CALL

 

This set contains the seven of our Carbide Forstner bits. From the 1/4" diameter to the 1-3/8" diameter these bits wil outlast standard forstners many times over. These bits come packaged in a sturdy wooden case for protection and storage.

APPLICATION: Drills all composition materials, plywood, hard wood, solid surface materials, and soft wood. Use in hand held drills and drill presses.

Part No#	Outside Diameter	Price
FC-107	1/4"	CALL
Set includes following bits:
FC-001	1/4"
FC-002	3/8"
FC-003	1/2"
FC-004	5/8"
FC-005	3/4"
FC-007	1"
FC-010	1-3/8"