Industrial Router Bits from Freud
HALF ROUND BITS
FREUD'S INDUSTRIAL ROUTER BITS


Freud Half Round Bits

Application: Bull nose profile for furniture and moldings

  • Produce a fully rounded edge on dimensional lumber or create an attractive half round profile on furniture and mouldings with this bit. Guiding device must be used.
  • Cuts all composition materials, plywood, hardwoods and softwoods
  • Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers
  • All illustrations are not to scale
  • Call for pricing: 1-800-TOOLING (866-5464)
    Phone: 828-628-4414

    Red part numbers indicate a 1/2" shank
Part Number Overall Dia. (D) Carbide Height (h) Large Radius(R) Shank Dia. (A) Overall Length (H) Price
FRD82-100 11/16" 7/16" 3/32" 1/4" 1-3/16" Call for pricing
FRD82-102 3/4" 1/2" 1/8" 1/4" 1-7/8" Call for pricing
FRD82-104 7/8" 27/32" 3/16" 1/4" 2-1/8" Call for pricing
FRD82-106 1" 29/32" 1/4" 1/4" 2-1/4" Call for pricing
FRD82-108 11/16" 7/16" 3/32" 1/2" 2-1/16" Call for pricing
FRD82-110 3/4" 1/2" 1/8" 1/2" 2-5/32" Call for pricing
FRD82-112 7/8" 27/32" 3/16" 1/2" 2-3/8" Call for pricing
FRD82-114 1" 29/32" 1/4" 1/2" 2-9/16" Call for pricing
FRD82-116 1-29/64" 1-11/64" 3/8" 1/2" 2-13/16" $60.99
FRD82-118 1-13/16" 1-27/64" 1/2" 1/2" 2-7/8" Call for pricing
FRD82-120 2" 2" 5/8" 1/2" 3-1/2" Call for pricing
Freud Half Round Bits with Bearings

Application: Versatile rounded edge for furniture and mouldings

  • These bits produce a fully rounded edge on dimensional lumber or an attractive half round profile on furniture and mouldings. Comes with ball bearing guide for template work.
  • Cuts all composition materials, plywood, hardwoods and softwoods
  • Use on a hand-held and table-mounted portable routers.
  • All illustrations are not to scale
Part Number Overall Dia. (D) Bearing Dia. (B)

Carbide
Height (m)

Large Radius (R1) Shank Dia. (A) Overall Length (H) Price
FRD82-510 1-5/32" 5/8" 1" 1/4" 1/2" 2-7/8" Call for pricing
FRD82-512 1-3/8" 5/8" 1-5/16" 3/8" 1/2" 3-1/4" Call for pricing
FRD82-514 1-3/4" 3/4" 1-9/32" 1/2" 1/2" 3-3/4" Call for pricing
FRD82-515 2" 3/4" 2" 5/8" 1/2" 3-13/16" Call for pricing
Freud Varible Corner Round Bit

Application: Rounding two edges in one pass

  • The Freud Variable Corner Round bit saves you time by rounding both edges on a board in one pass, rather than using standard rounding over bits that require two passes. Works with stock from 7/16" to 1-1/4" thick.
  • Cuts all composition materials, plywood, hardwoods and softwoods
  • Use on a hand-held and table-mounted portable routers.
  • All illustrations are not to scale
Part Number Overall Dia. (D) Bearing Height (B) Carbide Height (h) Minor Height (m) Large Radius (R1) Shank Dia. (A) Overall Length (H) Price
FRD99-028 1-19/32" 5/16" 17/64" 7/16-1-1/4" 3/16" 1/2" 3-1/2" Call for pricing
To reach a friendly voice, call during our hours of operation:
Monday through Friday, 9 a.m. to 6 p.m. EST
(Eastern Standard Time)

Wood Tech Enterprises
Our website: www.woodtechtooling.com

P.O. Box 2226
Fairview, NC 28730 USA

1-800-TOOLING (866-5464)
Phone: 828-628-4414
Fax: 828-628-4490

Shipping Address:
15 Khristy Scott Lane
Fairview, NC 28730 USA

Copyright © 1998-2011 Wood Tech Enterprises, Inc. All Rights Reserved. Designated trademarks and brands are the property of their respective owners. Wood Tech is not responsible for typographical errors. Prices are subject to change. All prices are in U.S. Dollars.