| GRINDING COOLANT |
SAFETY-COOL 9930 For Fast Cooling on Hot Jobs!Description
Castrol SyntiloTM 9930 is a synthetic coolant which has been developed for use as a general purpose grinding and light to medium duty machining fluid for ferrous metals. It forms a clear, stable solution in both hard and soft
waters. Syntilo 9930 exhibits good anti-corrosion properties coupled with a high resistance to bacterial attack.
Syntilo 9930 is developed for surface, cylindrical, double disk and centreless grinding. This product is also recommended for milling, turning, boring and light drilling operation on cast iron and low
• Low foaming in all water conditions to ensure continuous grinding performance
• Inhibits microbial growth to extend fluid life in central systems and individual sumps
• Rejects tramp oil to the surface of the fluid for easy removal
• Chlorine, phenol and nitrite free for environmental compliance
• Maintains corrosion protection in hard water
•Settles chips quickly to prevent grinding wheel build-up and maintain a clean working environment
- - - - - - - - - - - - - - - - -
NEW! SYNTILO 9918 is an operator friendly—neutral pH synthetic cutting and grinding fluid that combines optimum machining performance with a minimal mist—resulted in less dermatitis. This increases productivity with higher operator acceptance!
KEY PERFORMANCE BENFITS
Note: Prices are effective April 1, 2000 and are subject to change without notice. All prices are in US dollars.
With the Refractometer Coolant Tester, you can save money two ways. . .by using only as much coolant as you need and by better maintaining your equipment for longer life.
Proper concentration of coolant saves money upfront and in the long run. A cutting and grinding mixture that is too rich will waste expensive coolant, while a mixture that is too lean can shorten the usable life of equipment. Better monitoring of coolant can improve grinding finish, increase wheel life, and control corrosion.
REFRACTOMETER (0-32%) RECOMMENDED APPLICATIONS: For general concentration measuring of sugar and fruit juice, and industrial grinding and cutting fluids. This unit is great for the testing of fruits, vegetables and grasses, Wine or Beer makers and for the maintenance of CNC Coolants (Soluble Oils, Semi-Synthetics, Neo-Synthetics and Synthetics) and Water Soluble Drawing & Stamping Compounds. The Refractomer (0-32) has an ATC, and is excellent for indoor testing where temperature is not much of a concern! This ATC (Auto Temperature Compensation) unit also excellent for unheated or outdoor applications as well.
REFRACTOMETER (0-10%) RECOMMENDED APPLICATIONS: Use a unit with ATC (Auto Temperature Compensation) for unheated or outdoor applications. Models with the "ATC" suffix are equipped with "Automatic Temperature Compensation" for accurate measurements without recalibration after shifts in ambient working temperature (field use). Zero to ten( 0-10%) percent Brix range model is most widely used for raw maple sap, low sugar fruits and vegetables, and Reamsian bodily fluid testing and for synthetic or semi-synthetic machine and grinding coolants. This unit is twice as accurate as 0-32% models.
To reach a friendly voice, call during our hours of operation: