4197503 Construction Type: Sensor H, Version 10.0-133 ccm
ABNOX Metering Valve Stations with Sensor present a low coast and hence frequently used solution for monitoring the dosage process. This dispensing interrogation facilitates an optimal process supervision and guarantees a high service life through his robust construction. These Metering Valve Stations are suitable in particular for large volume metering applications and offer a simple and fast mounting option directly at the Metering Valve. 

c Metering Valve Station is available in different dispensing ranges. The dosage chamber volume is continuously adjustable by a screw adjustment. With the standard nozzles ABNOX constructs specific customised application nozzles which can be directly screwed to metering valve..


Function: The pneumatic part of the metering valve is controlled over an external pneumatic 5/2-way valve. The lubricant dosing is then initialized. The dispensing pressure depends on the pressure in the lubricant (medium). The air- and the lubricant chamber is separated from each other. The process safety increases itself through the specific construction. The initiator sends an electric impulse if the cycle is closed and the lubricant (medium) is ejected.

Tip: To guarantee a process-safe functioning of the Sensor H, the smallest adjusted metering mount has to be approx. 10% larger than the minimal amount marked on the valve. ABN recommends the nearest smaller valve to the lower dispensing rnge.

Model:

Station
Construction type Sensor H
Dispersing range (ccm) 10.0 - 133.0 ccm
Weight (kg) 7.7
Connection (medium) internal thread P 1/4" BSP
Connection (medium) external thread P 1/4" BSP
Connection (compressed air ) internal thread 1/8" BSP
Pressure output A 3/8" BSP

Fastening thread

 4xM8
Max. pressure (bar) 200
Min. operating air pressure (bar) 5.0

Pressure Out (bar)

 80
Optimum operating air pressure (bar) 6.0
Maximum operating air pressure (bar) 7.0

Specifications for operation medium

 Lubricant up to NLGI 3/max. 1'000'000 m Pa.s
Spare Parts:  
DESCRIPTION Article-No.
Seal Kit 4196900
Valve rod cpl. 4221600

To reach a friendly voice, call during our hours of operation:
Monday through Friday, 9 a.m. to 6 p.m. EST
(Eastern Standard Tim)

Wood Tech Enterprises
Our website: www.woodtechtooling.com

P.O. Box 2226
Fairview, NC 28730 USA

1-800-TOOLING (866-5464)
Phone: 828-628-4414
Fax: 828-628-4490

Shipping Address:
15 Khristy Scott Lane
Fairview, NC 28730 USA

Copyright © 1998-2016 Wood Tech Enterprises, Inc. All Rights Reserved. Designated trademarks and brands are the property of their respective owners. Wood Tech is not responsible for typographical errors. Prices are subject to change. All prices are in U.S. Dollars.