Character features of ABNOX Air Operated Drum Pumps:
ABNOX Drum Pump is suitable for transferring lubricants of medium to high viscosity levels. Thanks to the constant contact pressure of the follower plate onto the medium the follower plate is brought always to uptate the current fill level.
An empty state detector „container empty“ serves to switch off the pump when the low fill level has been reached, thus preventing the aspiration of air. Replacement of the empty container is quick, clean and convenient, and done with little manual effort. Thanks to complete drainage of the container, a minimum amount of lubricant is wasted.
The Drum pump mAXI with pressure ratio 60:1 is available with different upgrading options and suitable for all containers 180 kg available on the market.
Character features of ABNOX - Drum Pumps:
• High delivery rate by high pressure
• Modular design
• Long life time product
• Components harmonised perfectly with each other
• For large flow rates. Suitable for centralized supply pump
• Usable also for low temperatures
• No electric connector
• Exchangeable follower plate
• Adjustable pressure at the follower plate
• Automatic shutoff: stop the pump action by low fill level
• Reliability two-hand operation for the UP and DOWN from double cylinder pump lift.
| Upgrading Options |
| |
Article No. |
Quantity |
| Upgrading set acoustic warn signal „container empty“ (L) |
4630010 |
1 piece |
| Upgrading set low lewer indicator audiable alarm (G) * |
4630020 |
1 piece |
| Upgrading set electric refill and low lewer indicatore |
4630030 |
1 piece |
| Upgrading set 4 guide rollers |
4630040 |
1 piece |
| Upgrading set additional air vent for follower plate |
0000589 |
1 piece |
| Connection piece 1/4" BSP with gauge 400 bar and ball valve for air vent |
4082002 |
1 piece |
| Pressure Release with connection piece |
4082004 |
1 piece |
| * only available in combination with upgrading set acoustic warn signal „container empty“ (L), Article No. 4630010 |
 |
We are happy to calculate the follower plate for you.
To come up with the right size we need the following:
- lubrication type
- container height
- internal top-diameter
- internal bottom-diameter |
Container internal dia. (mm) |
550 - 580 |
| Container height (mm), |
870 |
| Suction tube dia. (mm), |
50 |
| Min. / Max. temperature (°C) |
10/40 |
| Min. / Max. temperature (°C |
Lubricants up to NLGI 4 / 1'000'000 m Pa s |
| Output pressure (medium) at operating pressure 6 bar [bar] |
320 |
| Output pressure (medium) at operating pressure 10 bar [bar] |
370 |
Delivery rate pro double stroke (cm3)
|
118 |
| Delivery rate at pump outlet [cm3/min] |
9000 |
Min. / Max. inlet operating pressure (medium) [bar]
|
4/7 |
Inlet operating pressure (compressed air) optimum [bar]
|
6 |
Max. air consumption [l/min.]
|
9200 |
Connection (Medium) External Thread P
|
1" BSP |
|