| CMT BIT ORGANIZERS | ||
|
| Bit Organizers Hold Up to 100 Bits! | |
| When you're working on a project you need your tools organized and close at hand. CMT's Bit Organizer is the perfect solution. This handy molded tray conveniently holds up to 100 router, drill and boring bits. By using our interchangeable bushings, the Organizer will accept any shank diameter. Order bushings from the chart below: | ||
| CMT Bit Organizers and Bushings | ||
| Item# | Description | Price |
| CMT-03.51.0106 | Bit Organizer without bushings | CALL |
| CMT-03.51.0047A | Bushings for 1/4" shanks (20 pieces) | CALL |
| CMT-03.51.0057A | Bushings for 3/8" shanks (20 pieces) | CALL |
| CMT-03.51.0049A | Bushings for 1/2" shanks (20 pieces) | CALL |
| CMT-03.51.0058A | Bushings for 10mm shanks (20 pieces) | CALL |
|
| The Rubber in Panalign Strips | |
| Beautiful panel doors can be ruined by a poorly-aligned panel. On your next door project, slip Panalign Strips into the stiles and rais to keep panels perfectly centered, while allowing for expansion. Unlike carpet foam, which eventually loses elasticity and ceases to work, the rubber in Panalign Strips is specially designed to spring back indefinitely. They are also the solution for a panel that is loose and rattles; inserting the strips keeps the panel such but not fixed. The rectangular shape makes the strips easy to handle. Typical doors require 4 to 8 strips each. | ||
| CMT Panalign Strips | ||
| Item# | Description | Price |
| PNL-001 | Panalign Strips, 200 quantity | CALL |
| PNL-002 | Panalign Strips, 500 quantity | CALL |
| PNL-003 | Panalign Strips, 1000 quantity | CALL |
|
| Our unique retainer strips fit perfectly in the 1/8" slot created by the slot cutter bit, and hold your glass securely in the frame. Sold in 25 foot lengths. | |
| CMT Panalign Strips | ||
| Item# | Description | Price |
| GLAS/RTBRN | 25 foot roll | CALL |
| CMT EASY MARK HARDWARE DRILLING JIGBACK TO ACCESSORIES | ||
|
| Makes Hardware Installation Simple, Fast and Accurate! | |
| The new Easy Mark Drilling Jig makes hardware installation simple and fast with absolute accuracy on any size door or drawers! Mounting door handles and drawer pulls has always been difficult and time-consuming. The holes had to be located, centered and drilled accurately so that the handles and pulls would line up perfectly. The Easy Mark takes all of the agony out of that process. A ledge along the back of the tool allows it to rest on the top of the drawer front as it is centered with the horizontal scales on each side. A sliding stop on the right side maintains the alignment for repeated use on the same-size drawer fronts. Three hardened steel bushings located in the sliding triangle are then centered vertically along the tool's half scale and locked into place for drilling. The two outside bushings are adjustable to accommodate 3" to 4-1/2" center handles. | ||
| CMT Panalign Strips | ||
| Item# | Description | Price |
| EZM-001 | Easy Mark Drilling Jig | CALL |
|
To reach a friendly voice, call during our hours of operation: |