Cratex Large Wheels have found wide application for removing rust, heat marks, tarnish, excess solder, scratches, corrosion...blending in and polishing welded seams after rough grinding...polishing bearing surfaces and race ways...removing burrs and breaking edges...smoothing and polishing castings and punched or sheared pieces...wet sanding of gem stones...trimming plastic articles...smoothing glass edges...cleaning before welding or soldering...and for countless other deburring, smoothing, and polishing operations.

• Hole sizes shown are the minimum diameter recommended for the various wheel sizes listed and wheels will be supplied this way unless larger holes are specified on your order. Wheels with larger holes can be ordered at the same price, providing hole diameter is a multiple of 1/8” and does not exceed 1-1/4”. For other hole sizes, request pricing.

• MAXIMUM SAFE SPEEDS in Revolutions Per Minute: 1-1/2” dia.-15,000; 2”-10,500; 2-1/2”-8,300; 3”-7,000; 4”-5,250; 5”-4,200; 6”-3,600; 7”-3,000; 8”-2,600; 10”-2,100. These speeds are based on 5,500 Surface Feet Per Minute. Best results are usually obtained at 30% to 80% of Maximum Safe Speed. Use light work pressure.

*Diameter in Inches

To reach a friendly voice, call during our hours of operation:
Monday through Friday, 9 a.m. to 6 p.m. EST
(Eastern Standard Time)

Wood Tech Enterprises
Our website: www.woodtechtooling.com

P.O. Box 2226
Fairview, NC 28730 USA

1-800-TOOLING (866-5464)
Phone: 828-628-4414
Fax: 828-628-4490

Shipping Address:
15 Khristy Scott Lane
Fairview, NC 28730 USA

Copyright © 1998-2011 Wood Tech Enterprises, Inc. All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.
Wood Tech is not responsible for typographical errors. Prices are subject to change. All prices are in U.S. Dollars.