 |
Freud's Shaper Cutters and Performance Systems® Cutters are revolutionary. Recognized for their versatility, qualityand innovation, Freud offers the flexibility to choose the cutter that fits every need. The conventional fixed wing shaper cutters and Performance Systems® Cutters with re-sharpenable inserts both feature Super Micro-Grain Carbided and Titanium, Anit-kickback design, computer balancing, shear angle and Multi-Axis Grinding. |
| If
you don't see what you are looking for please call us at 1-800-Tooling or 1-828-628-4414 be tween the hours of 8 a.m and 5:00 p.m. EST, Monday through Friday. |
| FREUD FIXED WING SOLID CARBIDE
CUTTERS - 2 + 2 RAISED PANEL CUTTERS |
|
 |
Freud 2 + 2 Raised Panel Cutters Freud's exclusive 2+2 Raised Panel Cutters produce raised panels that are glass smooth, even on cross grain with no splintering at the top of the profile edge. Freud's engineers have set two wings to do the main cutting of the profile, while two others cut the top part of the profile. As seen in the illustration below, the large wing is set a slightly positive angle (A) and a positive shear angle (B). this slices the wood from the main part of the profile (C), leaving a glass smooth finish. The two smaller wings, set at a steep positive hook angle (D), are sized so the outside diameter is slightly larger than the large wings (E). These small wings are also designed with a negative sheer angle (F). This allows the small wing to cut the vertical part of the profile with a down slicing action (G), pushing down all the wood fibers at the top of the panel and cleanly slicing them off. This leaves none of the fuzz associated with standard 3 wing cutters. |
 |
Freud 2+2 Raised Panel Cutters for 5/8" Stock |
 |
Freud 2+2 Raised Panel Cutters for 3/4 " Stock |
 |
Freud 2+2 Raised Panel Cutter for Double-Sided Panels |
 |
Freud Back Cutter for Double Raised Panels |
|
To
reach a friendly voice, call during our hours of operation: |
|
