1
Weinig Cutterheads Main Page
Weinig 504 Hydro Cutterheads
Weinig 513 Dual Angle Cutterheads
Weinig 536 Powerlock Insert Planing Cutterheads
Weinig 538 Powerlock Cutterheads
Weinig Powerlock Spiral Planerheads
Weinig Powerlock Spindle Adapters
Weinig Safety Locking Collar
Hydralic Grease Fitting with Special Seal
Weinig Cutterhead Taper Cleaning Device
Weinig Powerlock Custom Profile Insert Tooling System
Weinig Hydro Cutterhead Type 504

• Standard cutting angle 20° or 12° for selected hardwoods that present tear out problems.

• Maximum tolerance of concentricity (true running accuracy) 0.005mm (0.000197")

• Body of high-tensile steel

• Hydraulic grease fitting and pressure release valve located on each side of hydrohead.

• Designed for use with 1/4", 5/16" or 3/8" thick knives with 16-60" corrugated back.

• Designed for Weinig's Axial Constant Set-up System.

• Two-piece clamping sleeve ensures tolerance-free center clamping on spindles with or without keys.

• Cutterheads with 5° and 30° cutting angles available for special applications.

Tool Diameter 150mm ( 5-29/32") on Hydro- Cutterheads with 4 and 6 Knives
Tool Diameter 163mm (6-27/64") on Hydro-Cutterheads with 8 knives

FOUR KNIVES
Bore Size: 1-13/16" - 20 degree angles
No. of Knives Width Inches Width mm 20° Cutting Angle Part # Price
4 2-23/64 60 WEI#504-150-83 CALL
4 3-15/16 100 WEI#504-150-02 CALL
4 5-29/32 150 WEI#504-150-08 CALL
4 7-3/32 180 WEI#504-150-74 CALL
4 9-1/16 230 WEI#504-150-11 CALL
4 9-29/64 240 WEI#514-150-89 CALL
Bore Size: 1-13/16" - 12 degree angles
No. of Knives Width Inches Width mm 12° Cutting Angle Part # Price
4 2-23/64 60 WEI#514-150-21 CALL
4 3-15/16 100 WEI#504-150-38 CALL
4 5-29/32 150 WEI#504-150-44 CALL
4 7-3/32 180 WEI#514-150-88 CALL
4 9-1/16 230 WEI#504-150-47 CALL
4 9-29/64 240 WEI#514-150-78 CALL

Bore Size: 2-1/8" - 20 degree angles
No. of Knives Width Inches Width mm 20° Cutting Angle Part # Price
4 2-23/64 60 WEI#504-150-84 CALL
4 3-15/16 100 WEI#504-150-03 CALL
4 5-29/32 150 WEI#504-150-09 CALL
4 9-1/16 230 WEI#504-150-12 CALL
4 9-29/64 240 WEI#514-150-63 CALL
4 12-13/64 310 WEI#504-150-18 CALL
Bore Size: 2-1/8" - 12 degree angles
No. of Knives Width Inches Width mm 12° Cutting Angle Part # Price
4 2-23/64 60 WEI#514-150-39 CALL
4 3-15/16 100 WEI#504-150-39 CALL
4 5-29/32 150 WEI#504-150-45 CALL
4 9-1/16 230 WEI#504-150-48 CALL
4 9-29/64 240 WEI#514-150-67 CALL
4 12-13/64 310 WEI#504-150-54 CALL

SIX KNIVES
Bore Size: 1-13/16" - 20 degree angles
No. of Knives Width Inches Width mm 20° Cutting Angle Part # Price
6 2-23/64 60 WEI#504-150-86 CALL
6 3-15/16 100 WEI#504-150-20 CALL
6 5-29/32 150 WEI#504-150-26 CALL
6 7-3/32 180 WEI#504-150-77 CALL
6 9-1/16 230 WEI#504-150-29 CALL
6 9-29/64 240 WEI#514-150-75 CALL
Bore Size: 1-13/16" - 12 degree angles
No. of Knives Width Inches Width mm 12° Cutting Angle Part # Price
6 2-23/64 60 WEI#514-150-22 CALL
6 3-15/16 100 WEI#504-150-56 CALL
6 5-29/32 150 WEI#504-150-62 CALL
6 7-3/32 180 WEI#504-150-80 CALL
6 9-1/16 230 WEI#504-150-65 CALL
6 9-29/64 240 WEI#514-150-85 CALL

Bore Size: 2-1/8" - 20 degree angles
6 2-23/64 60 WEI#504-150-87 CALL
6 3-15/16 100 WEI#504-150-21 CALL
6 5-29/32 150 WEI#504-150-27 CALL
6 7-3/32 180 WEI#504-150-78 CALL
6 9-1/16 230 WEI#504-150-30 CALL
6 9-29/64 240 WEI#504-150-64 CALL
Bore Size: 2-1/8" - 12 degree angles
6 2-23/64 60 WEI#514-150-30 CALL
6 3-15/16 100 WEI#504-150-57 CALL
6 5-29/32 150 WEI#504-150-63 CALL
6 7-3/32 180 WEI#504-150-81 CALL
6 9-1/16 230 WEI#504-150-66 CALL
6 9-29/64 240 WEI#514-150-68 CALL

EIGHT KNIVES
Bore Size: 2-1/8" - 20 degree angles
No. of Knives Width Inches Width mm 20° Cutting Angle Part # Price
8 2-23/64 60 WEI#504-163-39 CALL
8 3-15/16 100 WEI#504-163-03 CALL
8 5-29/32 150 WEI#504-163-09 CALL
8 9-1/16 230 WEI#504-163-12 CALL
Bore Size: 2-1/8" - 12 degree angles
No. of Knives Width Inches Width mm 12° Cutting Angle Part # Price
8 2-23/64 60 WEI#514-163-42 CALL
8 3-15/16 100 WEI#504-163-21 CALL
8 5-29/32 150 WEI#504-163-27 CALL
8 9-1/16 230 WEI#504-163-12 CALL

Additional clamping wedges, screws and hydro clamping sleeves available separately.
Advise cutterhead size or article number when ordering.

Weinig Safety Locking Collars

 

For clamping together with less than full-width hydro-clamping cutterheads as a preventative measure against the tool loosening and spinning on the cutting shaft.

Part Number Description Price
WEI#WNW-101719 Safety Locking Collar for 1-13/16" spindles CALL
WEI#WNW-101720 Safety Locking Collar for 2-1/8" spindles CALL

Hydraulic Grease Fitting with Special Seal

 

For Weinig Hydro Heads

Part Number

Weinig Part Number Description Price

Grease-Zerk

WEI-003-11560 Hydraulic Grease Fitting Grease fitting MX10x1 (w/special seal) made of hardened steel absolutely tight up to 800 bar CALL

PresRel M10X

 WEI-003-03856 Pressure Release Valve Pressure release screw M10X1 (w/special seal) made of zinc-plated steel, absolutely tight up to 800 bar CALL

 

 

Click here to go to Grinding of Carbide Knives Info

Click here to go to Super Abrasive Wheels for grinding of carbide knives

Click here to go to Jointing of Carbide Knives Information

Click here to go to Jointing Stones

Click here to go to Diamond Sharpeners

Click here to go to Cleaning Sticks

Click here to go to main Corrugated Knife Steel Page

To reach a friendly voice, call during our hours of operation:
Monday through Friday, 9 a.m. to 6 p.m. EST
(Eastern Standard Time)

Wood Tech Enterprises
Our website: www.woodtechtooling.com

P.O. Box 2226
Fairview, NC 28730 USA

1-800-TOOLING (866-5464)
Phone: 828-628-4414
Fax: 828-628-4490

Shipping Address:
15 Khristy Scott Lane
Fairview, NC 28730 USA

Copyright © 1998-2011 Wood Tech Enterprises, Inc. All Rights Reserved. Designated trademarks and brands are the property of their respective owners. Wood Tech is not responsible for typographical errors. Prices are subject to change. All prices are in U.S. Dollars.