| Solid Carbide 2 Edge Compression Spiral Bits Spiral Bits are unsurpassed for cleaner cuts in ordinary or difficult materials, softwoods, hardwood, plywood, composites, etc. Due to their spiral cutting edge which stays in continuous contact with the workplace, these bits give a smooth, chatter-free cutting action, unlike conventional bits which have intermittent contact with the workplace. Ground from the finest micrograin carbide stock, CMT's Spiral Bits feature the latest in bit geometry. |
| SERIES 190 Z2+2 compression upcut & downcut 2 edge solid carbide |
 |
| Item #- right hand rotation | Shank | Cutting Dia. | Cutting Length inches | Upcut Cutting Length inches | Overall length inches | Mix and Match for Quantity Pricing |
| Inches | mm |
| CMT#190.504.11 | 3/8" | 3/8" | 9.53 | 1-1/8" | 7/16" | 3" |
CALL |
| CMT#190.505.11 | 1/2" | 1/2" | 12.7 | 1" | 5/8" | 3" | CALL |
| CMT#190.506.11 | 1/2" | 1/2" | 12.7 | 1-1/8" | 5/8" | 3" | CALL |
| CMT#190.507.11 | 1/2" | 1/2" | 12.7 | 1-3/8" | 5/8" | 3-1/2" | CALL |
| CMT#190.508.11 | 1/2" | 1/2" | 12.7 | 1-5/8" | 5/8" | 4" | CALL |
| SERIES 190 Z2+2 Solid Carbide Double-Bearing Spiral Flush Trim Bits - NEW! |
 | The new line of CMT solid carbide spiral flush trim bits are manufactured with a special super-micrograin formulation that has increased hardness with a higher transverse repture point. Combined with the low helix cutting angle, the new CMT solid carbide spiral flush trim bits with bearings allow the cabinet maker to sheer wood and wood products while providing more efficient chip ejection than standard flush trim bits. In a production setting, these new bits will run cooler and the edge will stay sharper longer which translates in to increased productiviy for your shop. See New Z2 Upcut Spiral and Downcut Spiral bits below. |
SPARE PARTS
791.010.00 1/2" Bearing
541.301.00 Seeger |
| CMT#190.508.11B | 1/2" | 1/2" | 12.7 | 1-5/8" | 5/8" | 4-1/2" |
CALL |
| |
| SERIES 190 Z2+2 mortise compression upcut & downcut 2 edge solid carbide |
|
| Item # - right hand rotation | Shank | Cutting Dia. | Cutting Length inches | Upcut Cutting Length inches | Overall length antes | Mix and Match for Quantity Pricing |
| Inches | mm |
| CMT#190.513.11 | 3/8" | 3/8" | 9.53 | 7/8" | 3/16" | 3" | CALL |
| CMT#190.515.11 | 1/2" | 1/2" | 12.7 | 1" | 13/64" | 3" |
CALL
|
| CMT#190.517.11 |
1/2" | 1/2" |
12.7 |
1-3/8" |
13/64" |
3-1/2" |
CALL
|
 |
| Solid Carbide 2 Edge Spiral Bits Premium quality super-micrograin carbide bits with 2 spiral cutting edges [Z2]. Provides an excellent finish on bottom side of the workpiece, upward chip ejection. Use these bits for an excellent edge finish on the bottom side of laminates and melamines. Can also be used with hardwood and other wood and plastic composites. For fast speed rates on AND routers, machining centers and point to point machines for ripping, panel sizing, template routing and other routing applications. |
| SERIES 191 Z2 upcut 2 edge solid carbide spiral |
 |
| Item # - right hand rotation | Shank | Cutting Dia. | Cutting Length inches | Overall length inches | PRICE |
| Inches | mm |
| CMT#191.001.11 | 1/4" | 1/8" | 3.18 | 1/2" | 2" | CALL |
| CMT#191.003.11 | 1/4" | 5/32" | 3.97 | 1/2" | 2" | CALL |
| CMT#191.005.11 | 1/4" | 3/16" | 4.76 | 3/4" | 2" | CALL |
| CMT#191.007.11 | 1/4" | 1/4" | 6.35 | 1" | 2" | CALL |
| CMT#191.008.11 | 1/4" | 1/4" | 6.35 | 1" | 2-1/2" | CALL
|
|
| CMT#191.501.11 | 1/2" | 5/16" | 7.94 | 1" | 3" |
CALL |
| CMT#191.503.11 | 1/2" | 3/8" | 9.53 | 1-1/4" | 3" | CALL |
| CMT#191.505.11 | 1/2" | 1/2" | 12.7 | 1-1/4" | 3" | CALL |
| CMT#191.506.11 | 1/2" | 1/2" | 12.7 | 1-1/2" | 3-1/2" | CALL |
| CMT#191.507.11 | 1/2" | 1/2" | 12.7 | 2" | 4" | CALL |
| CMT#191.509.11 | 5/8" | 5/8" | 15.88 | 2-1/8" | 4-5/16" | CALL |
| CMT#191.511.11 | 3/4" | 3/4" | 19.05 | 2-1/8" | 4-5/16" | CALL |
| SERIES 190 Z2 Up-Cut Double-Bearing Spiral Flush Trim Bits - NEW! |
| SPARE PARTS
791.010.00 1/2" Bearing
541.301.00 Seeger |
| CMT#191.505.11B | 1/2" | 1/2" | 12.7 | 1-1/4" | 3-1/2" | CALL |
| CMT#191.507.11B | 1/2" | 1/2" | 12.7 | 2" | 4-1/2" | CALL |
| |
| SERIES 192 Z2 downcut 2 edge solid carbide spiral |
 |
| Item # - right hand rotation | Shank | Cutting Dia. | Cutting Length inches | Overall length inches | PRICE |
| Inches | mm |
| CMT#192.001.11 | 1/4" | 1/8" | 3.18 | 1/2" | 2" | CALL |
| CMT#192.003.11 | 1/4" | 5/32" | 3.97 | 1/2" | 2" | CALL |
| CMT#192.005.11 | 1/4" | 3/16" | 4.76 | 3/4" | 2" | CALL |
| CMT#192.007.11 | 1/4" | 1/4" | 6.35 | 1" | 2" | CALL |
| CMT#192.008.11 | 1/4" | 1/4" | 6.35 | 1" | 2-1/2" | CALL |
|
| CMT#192.501.11 | 1/2" | 5/16" | 7.94 | 1" | 3" | CALL |
| CMT#192.503.11 | 1/2" | 3/8" | 9.53 | 1-1/4" | 3" | CALL |
| CMT#192.505.11 | 1/2" | 1/2" | 12.7 | 1-1/4" | 3" | v
|
| CMT#192.506.11 | 1/2" | 1/2" | 12.7 | 1-1/2" | 3-1/2" | CALL |
| CMT#192.507.11 | 1/2" | 1/2" | 12.7 | 2" | 4" | CALL |
| SERIES 192 Z2 Down-Cut Double-Bearing Spiral Flush Trim Bits - NEW! |
| SPARE PARTS
791.010.00 1/2" Bearing
541.301.00 Seeger |
| CMT#192.505.11B | 1/2" | 1/2" | 12.7 | 1-1/4" | 3-1/2" | CALL |
| CMT#192.507.11B | 1/2" | 1/2" | 12.7 | 2" | 4-1/2" | CALL |
|
| Solid Carbide 3 Edge Spiral Bits Premium quality super-micrograin carbide bits with 2 spiral cutting edges [Z2]. Provides an excellent finish on bottom side of the workpiece, upward chip ejection. Use these bits for an excellent edge finish on the bottom side of laminates and melamines. Can also be used with hardwood and other wood and plastic composites. For fast speed rates on AND routers, machining centers and point to point machines for ripping, panel sizing, template routing and other routing applications. |
| SERIES 195 Z3R upcut 3 edge chipbreaker |
 |
| Item # - right hand rotation | Shank | Cutting Dia. | Cutting Length inches | Overall length inches | Price |
| Inches | mm |
| CMT#195.506.11 | 1/2" | 1/2" | 12.7 | 1-1/2" | 3-1/2" | CALL |
| CMT#195.509.11 | 5/8" | 5/32" | 15.88 | 1/2" | 2" |
CALL |
| CMT#195.511.11 | 3/4" | 3/16" | 19.05 | 3/4" | 2" | CALL |
|
| Item # - right hand rotation | Shank | Cutting Dia. | Cutting Length mm | Overall length mm | Price |
| mm |
| CMT#195.120.11 | 12 | 12 | 35 | 80 | CALL |
| CMT#195.160.11 | 16 | 16 | 55 | 110 | CALL |
| CMT#195.180.11 | 18 | 18 | 55 | 110 | CALL |
| CMT#195.200.11 | 20 | 20 | 60 | 120 | CALL |
| |
| SERIES 196 Z3R downcut 3 edge chipbreaker |
 |
| Item # - right hand rotation | Shank | Cutting Dia. | Cutting Length inches | Overall length inches | Price |
| Inches | mm |
| CMT#196.506.11 | 1/2" | 1/2" | 12.7 | 1-1/2" | 3-1/2" | CALL |
| CMT#196.509.11 | 5/8" | 5/8" | 15.88 | 2-1/8" | 4-5/16" | CALL |
| CMT#196.511.11 | 3/4" | 3/4" | 19.05 | 2-1/8" | 4-5/16" | CALL |
|
| Item # - right hand rotation | Shank | Cutting Dia. | Cutting Length mm | Overall length mm | Price |
| mm |
| CMT#196.120.11 | 12 | 12 | 35 | 80 | CALL |
| CMT#196.160.11 | 16 | 16 | 55 | 110 | CALL |
| CMT#196.180.11 | 18 | 18 | 55 | 110 | CALL |
| CMT#196.200.11 | 20 | 20 | 60 | 120 | CALL |
|
