CMT Router Bits

Solid Carbide Spiral Bits
Straight Bits
Slot Cutters
Tongue and Groove Set
Dovetail Bits
Flush trim Bits
Combination Trimmer Bits
Solid Carbide Trimmer Bits
Panel Pilot Bits
Cavetto Edge Mold Bits
Keyhole Bits
Bevel Cutters
Drawer Lock Bits
Weatherseal Bits
Finger Joint & Professional Finger Joint Bits

Bowl Cutters
Bowl and Tray Bits
Round Nose Bits
60° Lettering Bits
60° Laser Point Bits
90° V-Grooving Bits
Rabbeting Bits
Cove Bits
Ovolo Bits
Roundover/Beading Bits
Bull nose Bits
Table Edge and Hand Rail Bits
CMT T-Slot Bits

Raised Panel Bits

Make classic raised panel doors with CMT's industrial quality Raised Panel Bits. They feature micrograin carbide cutting edges, our trademark orange coating, and anti-kickback design for safety.

SAFETY TIPS: These bits should be used at a lower speed, between 10,000 and 12,000 rpm. Three to five passes are recommended to safely obtain the profile you desire. To be used with routers of at least 2-1/4" HP.

RAISED PANEL BITS- SERIES 890.5
Shank Size - 1/2"
Item # 
Profile

Joint
Thickness
Min/ Max.

Cutting Diameter inches/mm
Cutting Length
Mix and Match for Quanity Pricing
CMT#890.501.11
A
19/32"/ 23/32"
3-1/4"/
82.5mm
19/32"
 CALL
CMT#890.502.11
B
19/32"/ 23/32"
3-1/4"/
82.5mm
19/32"
 CALL
CMT#890.503.11
C
19/32"/ 23/32"
3-1/4"/
82.5mm
19/32"
 CALL
CMT#890.504.11
A2
23/32"/ 25/32"
3-1/2"/
89mm
19/32"
 CALL
CMT#890.505.11
B2
23/32"/ 25/32"
3-1/2"/
89mm
19/32"
 CALL
CMT#890.506.11
C2
23/32"/ 25/32"
3-1/2"/
89mm
19/32"
 CALL
CMT#890.507.11
D2
19/32"/ 25/32"
3-1/2"/
89mm
19/32"
 CALL
CMT#890.512.11
B3
1/2"/ 19/32"
1-7/8"/
47.6mm
3/8"
 CALL
SPARE PARTS
990.423.00 1/2" bearing
791.003.00 1/2" bearing
990.057.00 Screw for bearing, 1/8Wx1/4"
991.057.00 3/8" hex key for 1/8W screws
 
SOMMERFELD RAISED PANEL BITS w back cutter - SERIES 890.524/527/534/537
Shank Size - 1/2"
Item # 
Profile

Joint
Thickness
Min/ Max.

Cutting Diameter inches/mm
Cutting Length
Mix and Match for Quanity Pricing
CMT#890.537.11
A
7/16"/ 11/16"
2-1/2"/
63.5mm
19/32"
 CALL
CMT#890.527.11
B
3/4"/ 1"
3-1/2"/
89mm
19/32"
 CALL
CMT#890.534.11
C
7/16"/ 11/16"
2-1/2"/
63.5mm
19/32"
 CALL
CMT#890.524.11
D
3/4"/ 1"
3-1/2"/
89mm
19/32"
 CALL
SPARE PARTS
822.007.11 5/16"two-flute slot cutter
822.010.11 1/4 "two-flute slot cutter
791.025.00 16mm bearing
791.033.00 1-1/4" bearing
541.515.00 0,1mm spacer
541.516.00 0,3mm spacer
541.517.00 0,5mm spacer
541.518.00 1mm spacer
990.020.00 Nut, M8 thread
VERTICAL RAISED PANEL BITS - SERIES 890.6
vertical raised panel bits CMT Mill raised panel doors and drawer fronts easily and economically just by putting a CMT Vertical Raised Panel bit in your router* and a sturdy 90° tall-fence on your router table. Meticulously studied, designed and crafted using the highest technology available, these bits are perfected down to the smallest detail. Choose any of the three vertical profile designs for the style you want.

*Recommended for use on routers of minimum 2-1/4 HP. Routers as low powered as 1-1/2 HP can be used, keeping to shorter, shallower runs.
Click here for safety precautions.
Shank Size - 1/2"
Item # 
Profile

Joint
Thickness
Min/ Max.

Cutting Diameter inches/mm
Cutting Length
Mix and Match for Quanity Pricing
CMT#890.601.11
A
19/32" - 23/32"
1-1/2"/
38mm
1-1/2"
 CALL
CMT#890.602.11
B
19/32"- 23/32"
1-1/2"/
38mm
1-1/2"
 CALL
CMT#890.603.11
C
19/32" - 23/32"
1-1/2"/
38mm
1-1/2"
 CALL
 

 

To reach a friendly voice, call during our hours of operation:
Monday through Friday, 9 a.m. to 6 p.m. EST
(Eastern Standard Time)

Wood Tech Enterprises
Our website: www.woodtechtooling.com

P.O. Box 2226
Fairview, NC 28730 USA

1-800-TOOLING (866-5464)
Phone: 828-628-4414
Fax: 828-628-4490

Shipping Address:
15 Khristy Scott Lane
Fairview, NC 28730 USA

Copyright © 1998 - 2011 Wood Tech Enterprises, Inc. All Rights Reserved. Designated trademarks and brands are the property of their respective owners. Wood Tech is not responsible for typographical errors. Prices are subject to change. All prices are in U.S. Dollars.